Product Description
5075 enclosed keep track of chain
5Ton regular chain features
No.1 Forging engineering
Each and every chain buckle is precision cast via 10 processes, and the breaking pressure of the chain reaches 55KN.
No.2 Chain duration precision
Underneath the test pressure of 270N/m, the measured deviation does not exceed +.3%~-.1% of the nominal size of the calculated length.
No.3 Higher hardness
The wheels are carburized and quenched, and the surface hardness reaches 45 degrees or far more.
No.3 Flexible turning
The minimal horizontal turning radius of the chain can be R300mm*180 levels (turntable elbow), and the chain will go by means of the elbow effortlessly with no jamming.
5Ton 5075 conveyor chain parameters
Model |
five Ton Normal Chain |
five Tons Horizontal Wheel Chain |
5 Tons Vertical Wheel Chain |
5 Tons Extra Weighty Chain |
Parameters | ||||
Chain pitch(mm) | a hundred and fifty | a hundred and fifty | one hundred fifty | 150 |
Solitary stage lifting(kg) | 15 | fifteen | twenty five | 25 |
Solitary level lifting excess weight KG (making use of Y-type spreader or beam spreader) |
35 | 35 | fifty | 50 |
Allowable chain rigidity (KN) | thirty | thirty | thirty | thirty |
Chain supreme tensile load KN | 55 | 55 | fifty five | fifty five |
Chain fat(kg/m) | four.two | 4.6 | 4.eighty five | five.3 |
Track specs | 57*67*17 | 57*67*17 | 57*sixty seven*17 | fifty seven*sixty seven*seventeen |
Minimum hanging distance (mm) | one hundred fifty | a hundred and fifty | 150 | one hundred fifty |
Vertical roller diameter (mm) | fifty two | 52 | fifty two | 52 |
Horizental roller diameter (mm) | forty five | 45 | forty five | forty five |
Relocating velocity (m/min) | .5-fifteen | .5-fifteen | .5-fifteen | .5-fifteen |
Minimal radius of gyration(mm) | R255 | R255 | R255 | R255 |
Bare minimum vertical radius(mm) | R500 | R500 | R500 | R500 |
Operating temperature(ºC) | 250 | 250 | 250 | 250 |
Company view
FAQ
one. who are we?
We are primarily based in ZheJiang , China, begin from 2000,market to Central The united states(40.00%),Northern Europe(30.00%),Western Europe(20.00%),South The united states(ten.00%). There are overall about 201-three hundred men and women in our business office.
2. how can we promise top quality?
Always a pre-generation sample ahead of mass production
Usually closing Inspection just before shipment
3.what can you get from us?
mdf powder coating line, steel powder coating line,residence appliances assembly line, electrostatic spray paining line, overhead line conveyor components.
4. why must you buy from us not from other suppliers?
we are a manufacturing facility for generating automatic coating line, residence appliance assembly line major in MDF powder coating line and steel powder coating and as properly as spare components spraying for vehicle and 3 c 3c course plastic shell portray line, washing device assembly line, LED Television set assembly line, Fridge freezer and CZPT dryer assembly line, air conditioner assembly line, and many others.
five. what services can we supply?
Recognized Shipping Conditions: FOB,EXW
Acknowledged Payment Currency:USD,HKD,CNY
Approved Payment Sort: T/T
Language Spoken:English,Chinese.
US $19-25 / Meter | |
100 Meters (Min. Order) |
###
After-sales Service: | on Line After Sale Service |
---|---|
Warranty: | 1 Year |
Structure: | Chain Conveyor |
Material: | Stainless Steel |
Material Feature: | Heat Resistant, Fire Resistant |
Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant |
###
Customization: |
Available
|
---|
###
Model |
5 Ton Standard Chain |
5 Tons Horizontal Wheel Chain |
5 Tons Vertical Wheel Chain |
5 Tons Extra Heavy Chain |
Parameters | ||||
Chain pitch(mm) | 150 | 150 | 150 | 150 |
Single point lifting(kg) | 15 | 15 | 25 | 25 |
Single point lifting weight KG (using Y-type spreader or beam spreader) |
35 | 35 | 50 | 50 |
Allowable chain tension (KN) | 30 | 30 | 30 | 30 |
Chain ultimate tensile load KN | 55 | 55 | 55 | 55 |
Chain weight(kg/m) | 4.2 | 4.6 | 4.85 | 5.3 |
Track specifications | 57*67*17 | 57*67*17 | 57*67*17 | 57*67*17 |
Minimum hanging distance (mm) | 150 | 150 | 150 | 150 |
Vertical roller diameter (mm) | 52 | 52 | 52 | 52 |
Horizental roller diameter (mm) | 45 | 45 | 45 | 45 |
Moving speed (m/min) | 0.5-15 | 0.5-15 | 0.5-15 | 0.5-15 |
Minimum radius of gyration(mm) | R255 | R255 | R255 | R255 |
Minimum vertical radius(mm) | R500 | R500 | R500 | R500 |
Working temperature(ºC) | 250 | 250 | 250 | 250 |
US $19-25 / Meter | |
100 Meters (Min. Order) |
###
After-sales Service: | on Line After Sale Service |
---|---|
Warranty: | 1 Year |
Structure: | Chain Conveyor |
Material: | Stainless Steel |
Material Feature: | Heat Resistant, Fire Resistant |
Application: | Chemical Industry, Grain Transport, Mining Transport, Power Plant |
###
Customization: |
Available
|
---|
###
Model |
5 Ton Standard Chain |
5 Tons Horizontal Wheel Chain |
5 Tons Vertical Wheel Chain |
5 Tons Extra Heavy Chain |
Parameters | ||||
Chain pitch(mm) | 150 | 150 | 150 | 150 |
Single point lifting(kg) | 15 | 15 | 25 | 25 |
Single point lifting weight KG (using Y-type spreader or beam spreader) |
35 | 35 | 50 | 50 |
Allowable chain tension (KN) | 30 | 30 | 30 | 30 |
Chain ultimate tensile load KN | 55 | 55 | 55 | 55 |
Chain weight(kg/m) | 4.2 | 4.6 | 4.85 | 5.3 |
Track specifications | 57*67*17 | 57*67*17 | 57*67*17 | 57*67*17 |
Minimum hanging distance (mm) | 150 | 150 | 150 | 150 |
Vertical roller diameter (mm) | 52 | 52 | 52 | 52 |
Horizental roller diameter (mm) | 45 | 45 | 45 | 45 |
Moving speed (m/min) | 0.5-15 | 0.5-15 | 0.5-15 | 0.5-15 |
Minimum radius of gyration(mm) | R255 | R255 | R255 | R255 |
Minimum vertical radius(mm) | R500 | R500 | R500 | R500 |
Working temperature(ºC) | 250 | 250 | 250 | 250 |
drive chain type
Drive chains are used in a variety of industrial applications. Unlike roller chains, which are more efficient in terms of weight and size, drive chains slide on steel guides. Drive chains are often used for dirty work. Here’s what you need to know about the various types of drive chains. In this article, we’ll look at pin chains, engineered steel chains, bushing roller chains, and timing chains. These types are the most common and the most commonly used.
time chain
There are several factors to consider when deciding which drive chain to buy. What matters is how long the chain will last, as the timing chain will stretch over time. However, they are pre-stretched during manufacture to reduce the risk of stretching. Timing chains can also be noisy compared to toothed belt drives, but rails and chain tensioners can alleviate this problem. Timing chains also wear slower than belts, reducing repair costs.
Timing chains require little maintenance compared to belt drives. When well lubricated, timing chains require little maintenance. The only maintenance really required is checking the engine oil level and following the manufacturer’s recommended service intervals. Timing chains of drive chains are also safer than belt drives and can be dangerous if the toothed belt tears. Also, the timing chain only needs minor repairs and replacements. Garages can purchase complete timing chain kits that contain all the parts needed for repairs.
Drive chains can be equipped with roller chains or timing chains, depending on the load on the engine. The style of the timing chain depends on the type of motor used. However, the roller chain is the most common choice due to its high strength and NVH properties. The roller chain has two tabs pressed into the eyes, and two rollers above them. These components work together to improve engine performance.
Many modern vehicles use timing chains. Timing gears synchronize the camshaft and crankshaft so that the valves open and close at the appropriate times. This is critical to the running quality, power output, and fuel consumption of the engine. The timing chain also reduces the amount of pollution emitted by the vehicle. Over the past two decades, many OEMs have turned to time chains for OHC/DOHC engines.
pin chain
Steel pivot chains feature open barrels to reduce blocking and material buildup. These chains are designed for power transmission and transportation applications, often used in agricultural applications. They can be custom welded using specialized accessories. These chains can be used in agricultural, industrial and municipal applications. Here’s a closer look at each. Read on to learn about the benefits of steel pivot chains.
The Long Pitch Class 700 Pivot Chain is a versatile chain for conveying and lifting products. Its T-head pins fit snugly so dust doesn’t get into the pin holes. It is also constructed with a closed bearing structure to prevent elongation due to wear. Steel pivot chains are designed for high fatigue applications and are versatile.
Engineering Steel Chain
Engineered steel drive chain provides maximum power transfer while minimizing weight. Engineering chains are often used for tough oil drilling operations. Designed for durability and tight tolerances, these chains can be used in a variety of industrial equipment. Whether you need to lift heavy objects or store a lot of items, engineered steel chains will do the job. Read on to learn more about the benefits of engineering chains.
Engineered steel chains consist of links or pin joints with large gaps between the components. The material of these chains is designed to handle abrasives. While many of these chains are used as conveyors, some are designed for drives. You can find these chains on conveyors, forklifts, bucket elevators, oil rigs and more. To get the most out of them, they should be able to withstand the power produced by the prime mover.
The chain can withstand high tensile stresses and is ductile enough to withstand fatigue. The center-to-center distance between the chain and sprockets is between 30% and 50% of the pitch. On smaller sprockets, the arc of contact between the teeth and chain must be at least 120 degrees. The resistance of the chain drive depends on the use environment, including vibration, noise, fatigue strength and other factors.
There are many types of engineering steel drive chains, each with a different function. The most commonly used type is the elevator. Its lift mechanism raises and lowers the carriage. Most cranes are attached to the load with hooks. Another type of chain is the oval link. Its links are welded and the sprocket has receivers for each link. It is used in low speed applications for elevators, chain hoists and anchors in offshore operations.
Bushing Roller Chain
Typically, a bushing roller chain as a drive chain consists of two link assemblies. The inner link consists of two plates held together by two sleeves, while the outer link consists of two plates connected by pins that pass through the inner link. However, there are some differences between bushing roller chains. The main difference is the type of link and the amount of lubrication required. If you want to learn more about bushing roller chains, keep reading.
While roller chains are generally stronger and more durable than bushing chains, they are not immune to wear. During the driving cycle, they lengthen and undergo a process called articulation. The rate at which they elongate depends on the lubrication and load applied to them. The frequency of pin and bushing articulation is also critical. Like other wear parts, the manufacture of critical wear parts requires close attention to detail to ensure optimum performance. Correct raw material selection, part fabrication, and assembly are key factors in achieving optimum performance. Improperly prepared parts can affect wear life and performance.
Consider your application and load distribution when selecting a bushing roller chain as your drive chain. The length of the chain must be between 30 and 50 times its pitch. The arc of contact between the small sprocket teeth must be at least 120 degrees. The resistance of the drive chain depends on the usage environment, which will determine its fatigue strength and vibration level. It’s a good idea to check the chain length before deciding to replace it.
flat top chain
The TSplus flat top drive chain is the most flexible conveying medium on the market today. They can be connected end-to-end to create extended conveyor lines. The side bend design allows it to be used with a variety of conveyor types including inline, snake, and carousel conveyors. These chains are available in a variety of sizes, ranging in width from 3 feet to 20 feet.
A variety of materials are available for flat-top chains, including steel and plastic. Steel chains are ideal for applications requiring wear resistance. They are sturdy and well made. Plastic chains are particularly durable, but not suitable for harsh environments. Stainless steel flat top chains are suitable for a variety of applications, and some manufacturers make them from stainless steel or even aluminum. If your application requires a durable flat top chain, choose a chain made from iwis hardened stainless steel.
Another type of flat-top drive chain is the side bend chain. Suitable for flexible machinery requiring efficient conveying. It is equipped with a single hinge pin or double hinge pin. Either option will do, but each hinge pin has its advantages. Single hinge pin chains are suitable for smaller light-duty conveyors, while double hinge pins are more suitable for medium and heavy-duty applications.
CZPT is a modular flat top chain conveyor system. Its standardized components and modules can be easily integrated into any production process. And because it’s a single track, you can lengthen or shorten it as needed. Its versatile design makes it compatible with other conveyor systems such as belts and sprockets. This monorail modular design allows system lengths up to 40 meters and is compatible with other conveyor systems.
editor by czh 2022-12-26