Performence Characteristics:
1.Bed body, worktable, slide, column, headstock, and so forth are manufactured up by higher rigidity cast iron content.
two.X/Y/Z-axis adopts rectangular manual way, optional ZheJiang HIWIN linear guidebook approaches
3.X/Y/Z-axis servo motor connects ZheJiang HIWIN high precision ball screws by means of one particular elastic coupling respectively
four.Z-axis servo motor is with automated self-braking perform
5.ZheJiang spindle unit with 8000rpm,the max. spindle pace can be accomplished to 8000rpm. NSK bearing for spindle with P4 grade
6.ZheJiang model Spherical sort device magazine
7.Geared up with large circulation cooling pump and large capability water tank, completely make certain the cooling, the energy of the cooling pump is 120W ,20L/min, substantial pressure punching and supply the entire cooling.
eight.There is also cooling jet at the leading surface area of spindle box, which can be either water cooling or air cooling, and can be transformed very easily
9.Pneumatic triple can filter impurities and dampness in the gas source, to prevent the hurt and corrosion of the device components by the impure fuel. Electromagnetic valve team by PLC system control, make sure that the spindle unfastened instruments, spindle middle blowing, spindle folder instruments, air cooling spindle and many others. actions can be finished swiftly and correctly.
ten.With Centralized computerized lubrication.
CZPT parameter:
Product | unit | VMC1000 |
Table size | mm | 1100×600 |
T slot no./width/length | no/mm | five/18/one hundred |
Max. load of worktable | kg | 600 |
Longitudinal travel | mm | 1000 |
Cross travel | mm | 600 |
Vertical travel | mm | 550 |
spindle nose to table surface | mm | a hundred and fifty-seven hundred |
spindle axis to column surface | mm | 660 |
Spindle taper | BT40 | |
Speed Range | rpm | 60-8000 |
Max.spindle torque | N.M | 35.eight |
spindle motor power | kw | seven.five/eleven |
feed motor (X/Y/Z) | KW | 1.eight |
cuttiing feed X/Y/Z | mm / min | 2.5-ten thousand |
rapid feed X/Y/Z | m / min | 24/24/18(box guide way) 30/30/24(linear guide way) |
tool magazine capacity | piece | 24 |
tool magazine type | round disc type | |
Max. Dimension of tool | mm | Ø150×350 |
Max. tool weight | kg | eight |
Tool changing time (tip to tip) | s | one.four |
positioning accuracy | mm | ±0.005/three hundred JIS |
repeat positioning accuracy | mm | ±0.003/three hundred JIS |
air pressure | Mpa | five |
overall dimensions(LxWxH) | mm | 2800x2200x2600 |
CZPT Add-ons:
SIEMENS 828D method
RS232 interface
8000rpm spindle speed
Rectangular hardened guideway
Perform lamp
Coolant technique
Centralized automated lubrication
CZPT hand wheel
Ball screw from ZheJiang
24 pcs round-sort device magazine
Optional Equipment:
Fanuc oi MF controller
Siemens 808D controller
GSK or KND or HNC controller
The fourth -axis
Spindle unit with Oil coolant
Chain kind chip conveyor
Round-sort resource magazine functionality 16 resources
three axis with CZPT manual way