daf Papermaking Plant  sewage remedy  Dissolved air Flotation Equipment

Description:
       
        YW sequence Dissolved Air Flotation is largely for sound-liquid or liquid-liquid separation. Huge sum of micro bubbles developed by dissolving and releasing technique adhere to reliable or liquid particles with very same density as squander h2o to make the entire float to the floor therefore obtain the goal of strong-liquid or liquid-liquid separation.

CZPT Parameter:
 

Design	Potential(m³/h)	Dissolved Fuel drinking water(m³/h)	Primary dynamo energy(KW)	Foam scraper electricity(KW)	Air compressor energy(KW)	Dissolved air tank dimension(mm)	Total dimension(mm)
YW-five	4-five	1.5-2	3	.55	1.five	φ400×1000	3300×1800×2000
YW-10	8-ten	2-three	four	.fifty five	one.five	φ500×1512	4000×2100×2200
YW-20	fifteen-twenty	five-7	seven.5	.55	1.five	φ500×1512	4600×2400×2200
YW-30	twenty-30	6-10	seven.5	.fifty five	one.five	φ500×1512	5200×2600×2400
YW-40	30-forty	eight-thirteen	7.5	.75	2.2	φ600×1880	6000×2600×2400
YW-50	forty-50	fifteen-twenty	seven.5	.seventy five	2.2	φ600×1880	7000×2600×2400
YW-sixty	fifty-60	18-27	eleven	.seventy five	2.2	φ600×1880	7600×2800×2400
YW-70	sixty-70	22-30	eleven	.75	two.two	φ650×2034	8400×2800×2400
YW-eighty	70-80	24-32	11	.seventy five	three	φ650×2034	9200×2800×2400
YW-one hundred and five	90-105	30-35	15	one.5	three	φ700×1980	10000×2800×2600
YW-150	one hundred twenty five-150	60-80	22	one.one	4	φ700×1980	13500×2800×2600
YW-200	175-two hundred	eighty-one hundred	30	one.one	5.five	φ800×2100	15800×2800×2600
YW-250	225-250	100-one hundred twenty	37	one.one	5.five	φ800×2400	15200×3400×2600
YW-three hundred	280-three hundred	120-a hundred and eighty	37	1.one	five.five	φ1000×2900	19200×3400×2800

Composition:

        YW Dissolved Air system is composed of Air Dissolving Program(dissolved air pump,air compressor ,dossolved air tank, releaser and so on.),air flotation tank, scraping technique(foam scraper reducer, chain,scraping board and so on).

Item Functionality:

1.The DAF equipment depends on a large quantity of micro-bubbles to remove the flocculation of  the adhesion reaction,so the flocculayion requirements are not substantial ,which can minimize the flocculation time and save the flocculation agent.

2.Higher generate for every unit location,small pool ability and ground spot,conserving land and expense.

three.Practical sludge discharge ,low water consumptionlow moisture articles of sludge.

four.Shallow tank physique depth ,simple tank structure .The equipment can be opened and stopped at any time in accordance to the scenario and the genuine requirements,CZPT influencing the h2o high quality ,effortless procedure and upkeep.

Programs:

one.Separation of oily(which includes emulsified) wastewater from petroleum, chemical and mechanical processes.

2.CZPTvery of sewage natural matter.(this sort of as recovery of pulp fibers and fillers from paper mill wastewater).

3.Remedy of wastewater with higher chroma and lower dissolved oxygen.Such as textile printing and dyeing wastewater therapy .

four.Remedy of oxide-prosperous wastewater that contains algae.

five.Remedy of reduced temperature and low turbidity sewage.

6.Replace secondary sedimentation tank, suitable for the circumstance that is easy to make sludge swellingIt is ideal for the concentration of residual activated sludge and practical for the remedy of filter push.

         

              
Transportation Deal:

Guidelines:

one.Punning foundation ahead of set up .Block up one hundred-150mm with concrete mortar or pick overhead set up ,make certain the basis can bear the bodyweight of the equipment in operation.

two.The horizontal must be altered when the equipment is in placement.

3.Sewer is needed for the discharge of drinking water in cleansing air floating pond.Open up channel or pipeline related to the regulating reservoir is alright.

4.The pipeline which hyperlinks sewage entrance and reaction tank need to be limited (the shorter,the much better) in purchase to keep away from the injury of flocculants.

five.The clean water entrance can be related with sewer ,or be connected with the up coming treatment equipment if needed.

six.Sludge exit can be connected with sludge tank or sludge therapy equipment.

seven.CZPTal cupboard should be put about the staircase,keep the environment cleanse.

Company Introduction:

FAQ:

one.Q:Are you a manufacturing facility or investing business?
   A:We are a factory  ,we have wealthy encounter for manufacuring water processing tools for    a lot more than ten several years.

two.Q:Where is your manufacturing unit found? How can I pay a visit to there?
   A:Our manufacturing facility is found in No.1137,HangCZPT city ,ZheJiang Province, China .It is about two hours  from HangCZPT airport, HangCZPT practice station and Wei fang prepare station. We can pick you up if you  need ,welcome to go to our factory.

three.Q:Do you have minimum order quantity request?  
   A:No least purchase, but it can get a discount if you purchase a big amount.

4.Q:Do you have certificates?
   A:Of course,we have ISO,SGS certification.

5.Q:Can you satisfy my special require mwnts for my products?
    A:Indeed,we have a skilled style crew.We can provide drawings in accordance to your                needs.

6.Q:How to get your concept goods?
   A:You can give us your water or squander sources,water or squander top quality,flow rate and ground    spot (join us for more details) .

seven.Q:How to shell out?
   A:T/T and L/C are acceptable and T/T will be far more appreciated thirty% deposit before                         producing,70% balance ahead of loading by T/T.

8.Q:What is the shipping time ?
   A: It is dependent on get quantitles .CZPTly speaking ,the shipping and delivery time will be in four to 6 months.

nine.Q:How to pack the items?
   A:We use regular package .If you have specific deal requirements ,we will pack as required ,but the fees will be paid out by clients.

10.Q:How to maintain your equipments from corrosion?
     A:We use the entire world-popular paint ,like Sigma Coatings ,Pain ,Bow, etc. What’s more ,we paint strictly in accordance to the standard process.

11.Q:How do you manufacture your products?
     A:Our machining technologies contains laser 1 plasma cutting ,computerized welding, CNC chopping and bending.

12.Q:How to set up soon after the equipments arriving vacation spot?
     A:We will offer detailed illustrations to you. If it is needed, we will send out specialists to aid you. However, the visa fee ,air tickets ,accommodation, wages  will be paid out by purchasers.